Where Musician Engage
Sort by

Universal Audio 1176LN Classic Limiting Amplifier

365,220.00
No. of Channels 1
Controls Input, Output, Attack, Release, Ratio (Buttons)
Threshold No
Ratio 4:1, 8:1, 12:1, 20:1
Frequency Response 20Hz-20kHz
Sidechain Inserts No
Inputs 1 x XLR
Outputs 1 x XLR
Sidechain I/O No
Rackmount Space 2U
H x W x D 3.5" x 19" x 12.25"
Weight 5 kg

Universal Audio 6176

426,115.00
Preamp
Microphone Input Impedance Selectable, 500 Ω(ohms) or 2k
Balanced Line Input Impedance 20k Ω
Hi-Z Input Impedance  Selectable between 2.2 M Ω or 47 k Ω
Maximum Microphone Input Level +18 dBu (2k input impedance and 15 dB Pad in)
Maximum Output Level +20 dBm
Internal Output Impedance 80 Ω
Recommended Minimum Load 600 Ω
Frequency Response 20 Hz to 20 kHz +0, -1 dB
Maximum Gain 65 dB (500 Ω input impedance)
Signal-to-Noise Ratio  > 90 dB (@ maximum gain)
Limiting Amplifier
Input Impedance Selectable, 15k Ω (ohms) or 600 Ω
Output Load Impedance 600 Ω (floating)
Frequency Response  20 Hz to 20 kHz ± 1 dB
Gain 40 dB, ± 1 dB
Distortion  > 0.5% T.H.D. from 50 Hz – 15 kHz with limiting, at 1.1 seconds release setting. Output of +22 dBm with no greater than 0.5% T.H.D.
Signal-to-Noise Ratio  > 75 dB
Attack Time Adjustable, from 20 to 800 microseconds
Release Time  Adjustable, from 50 milliseconds to 1.1 seconds
Stereo Interconnection Optional, using 1176SA stereo interconnect accessory
General
Tube Complement  (1) 12AX7A, (1) 12AT7A
Power Requirements 115V/230V
Power Connector Detachable IEC power cable.
Fuse  400 mA time delay (slow blow) / 115 V200 mA time delay (slow blow) / 230 V
Power Indicator Light  28 V bulb (type 1819)
Dimensions 1  9' W x 3.5' H x 12.25' D (two rack unit)
Weight 12 lb.

Universal Audio LA-610

304,335.00
Specifications
  • Mic, Line and Hi-Z Input, Line Output
  • Dual Impedance Mic and Hi-Z inputs (Mic: 2K, 500Ω, Hi-Z: 2.2M, 47KΩ)
  • 5 position Stepped Preamp Input Gain, Continuous Preamp Output Level
  • -15dB Pad Switch (15dB Pad/Off)
  • Phase reverse (0/180º)
  • 48 volt Phantom Power switch (+48v/Off)
  • +/- 9 dB stepped High Shelving Filter (4.5, 7, 10 kHz)
  • +/- 9 dB stepped Low Shelving Filter (70, 100, 200 Hz)
  • T4 Optical Compressor with Continuous Peak Reduction and Makeup Gain
  • Compress/Limit/Bypass Modes of Dynamic Operation (3:1 / ∞: 1)
  • Meter Source Selector Switch (Preamp/Gain Reduction/Compressor)
  • Front Panel Power switch (On/Off)
  • Custom Altran and Cinemag Transformers

Universal Audio LA2A

730,570.00
Input Impedance 50, 150, 250, 600 ohms
Output Load Impedance 50, 150, 250, 600 ohms
External Connections Jones Barrier terminals and XLR connectors
Frequency Response +0/-1 dB 30 Hz to 15kHz
Gain 40 dB ±1dB
Input Level +16 dB maximum
Output Level +10 dB nominal, +16 dB maximum
Distortion Less than 0.5% THD (0.25% typical) at ±10 dBm
Noise 70 dB below +10 dBm output level
Attack Time 10 microseconds
Release Time 0.06 seconds for 50% release; 0.5 to 5 seconds for complete release
Meter dB gain reduction and dB output
Power Requirements 35 watts, 120/240 volts, 50/60 Hz
Environmental
Maximum operating temperature 160°F
Dimensions 19' Rackmount chassis, 3U
Weight 13 lbs.

Universal Audio Solo 610

170,370.00
Input Impedance
Mic Input Selectable 450 ohms (Lo-Z) or 1.6 kilohms (Hi-Z)
DI Input Selectable 2.2 megohms (Lo-Z) or 50 kilohms (Hi-Z)
Output Load Impedance 20 Hz to 20 kHz +/- 1 dB
Maximum Gain 61 dB
Tube Complement (1) 12AX7, (1) 12AT7
Maximum Mic Input Level -12 dBu, 1.0% THD+N Ratio
Maximum Instrument Input Level +4 dBu, 1.0% THD+N Ratio
Maximum Gain Mic Input 55 dB (1.6K ohm input), 60 dB (450 ohm input)
Mic/Instrument In Frequency Response 20 Hz to 20 kHz, +/- 0.1 dB
Maximum Gain Instrument Input 37 dB
Dimensions
L 14'
W 5 3/4'
H 5'
Weight 9 lbs.
Back to Top
Product has been added to your cart